---------------------- multipart/alternative attachment I am a fan of neither of these solutions, tho from one of course realizes that reality rules the world (at least sometimes). That being given, driving in the pins is basically a useless solution. You at best gain perhaps 3 mm of new grip, and sometimes end up with a less then desirable relationship bewteen the strings and the pressure bar. In short it doesnt really work, and certainly doesnt last more then a short time. CA glue, very thin seems to be the best quick fix. Personally, I dont do this kind of thing. I am fortunatly in a position where I have the luxery of passing this kind of work on to other guys. I need to work on my woodworking skills so if one customer doesnt want an old beater fixed up really well, another one will. This also has the side benifit of keeping me away from the kind of customer that likes to complain about everything. And before anybody gets all hot and bothered about some implications that last statement may or may not have... let me make my self perfectly clear.... grin... Only a small minority of those folks who dont want to spend a lot of money are problem customers. Its just that I find that group of folks the most risky. grin. Richard Brekne I.C.P.T.G. N.P.T.F. Bergen, Norway George Todd wrote: > Do you think I should use tuning pin tightener or drive in pins > deeper when there are some loose pins? These pins have never been > driven in, and a solution has never been used before. Which is better > to do? ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/df/13/5a/ae/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC