Doug, We use a buffing machine to polish the capstans on most pianos. It works well. We tend to use a worn or smaller wheel (stitched) to prevent touching the key stick. Also rub a bit of teflon powder into the capstan felt to complete the job. Graeme Harvey New Plymouth NZ ----- Original Message ----- From: Nancy McMillan <nlm@csu.cted.net> To: <pianotech@ptg.org> Sent: Saturday, November 13, 1999 12:49 AM Subject: Re: Removing burrs on capstans? > Newton replied: > > > I have used a mill file, whet stone, a buffer and a piece of hardwood > > (prevents scoring) and much prefer the buffer. > > > > Newton > > > Hi Newton, > > A cloth buffing wheel will take off burrs? > > Doug Mahard, Associate > >
This PTG archive page provided courtesy of Moy Piano Service, LLC