bridle wires

[Jim Coleman, Sr.]

HI David;

It's easier to just put a drop of polyvinyl glue at the bottom of the
curve of these bridle wires. This will keep the bridle strap from riding
down the wire.

Jim Coleman, Sr.

On Tue, 23 Nov 1999, David ilvedson wrote:

> List,
> 
> Baldwin, Hamilton type.  Bridle straps are falling down the 
> bridle wire because it's the straight type with just a little bend 
> to hold them on.  I tried a little CA to seal the strap but any 
> other ideas.  I of course can replace the straps if they want to 
> spend the money but the design of the bridle wire is the 
> problem.
> 
> David I.
> 
> David Ilvedson, RPT
> Pacifica, CA
> ilvey@jps.net
>