It shoudn't be any problem if you have a hammer removing tool. Regards Murray -----Original Message----- From: Don <drose@dlcwest.com> To: pianotech@ptg.org <pianotech@ptg.org> Date: November 27, 1999 7:28 AM Subject: de gluing >Hi all, > >I need to disassemble a hammer and shank assembly to replace a cracked >butt. It looks like some sort of white thermoset glue was used. Anyone have >any luck with this material? The piano happens to be a Young Chang upright. > > >Regards, >Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > >Tuner for the Saskatchewan Centre of the Arts > >drose@dlcwest.com >http://donrose.htmlplanet.com/ > >3004 Grant Rd. >REGINA, SK >S4S 5G7 >306-352-3620 or 1-888-29t-uner > >
This PTG archive page provided courtesy of Moy Piano Service, LLC