Yamaha Mute Rail

David ilvedson ilvey@jps.net
Sun, 28 Nov 1999 19:52:57 -0800


It might be detached on the treble side from the case, where it 
pivots.  

David I.


From:           	Dpshans@AOL.COM
Date sent:      	Sun, 28 Nov 1999 22:30:28 EST
Subject:        	Yamaha Mute Rail
To:             	pianotech@ptg.org
Send reply to:  	pianotech@ptg.org

> Dear List:
> 
>        I'm scheduled to look at a Yamaha U1 for a new client.  They claim 
> that with the mute rail in the "on" position the hammers from the upper tenor 
> to the high treble seem to block, and not return.
> 
>        I asked them by phone to look, and they say the hammers seem to be 
> striking in the center of the mute felt, so it wouldn't seem like a case of 
> the hammer tops getting stuck against the bottom of the felt.  
> 
>        Having not seen that many U1's, and not observing this before, it 
> sounds a bit puzzling.  Client is very happy with the piano when the mute 
> rail is not in use.  Has anyone dealt with this before?  Any good repair 
> ideas?  Thanks in advance.
> 
> Dan Dannenfelser
> Sacramento, CA  
> 
>      
> 


David Ilvedson, RPT
Pacifica, CA
ilvey@jps.net


This PTG archive page provided courtesy of Moy Piano Service, LLC