If this new method you mention is Lock-N-Stitch pins it is not a sure fix for piano plates. I've had enough experience with it that I would not use it by it self to repair a crack in a plate. I would be happy to discuss this in more detail if the group wishes. Richard O Snelson Oliver Piano Services ---------- Original Message ---------------------------------- From: "Allan L. Gilreath, RPT" <agilreath@mindspring.com> Reply-To: pianotech@ptg.org Date: Thu, 7 Oct 1999 21:21:13 -0400 >Les and everyone, > >There have been many good items pointed out and several solutions presented. >If everything holds until then, we're looking at having a firm present a >program in Arlington at Institute 2000 about a new way to repair cast iron >and aluminum without welding. We certainly hope to get this lined up so >watch for the information on these classes. > >Allan >Allan L. Gilreath, RPT >Assistant Institute Director >PTG Annual Convention >Arlington, VA July 5-9, 2000 >Agilreath@mindspring.com >706 629-3063 > >-----Original Message----- >From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of >ETomlinCF3@AOL.COM >Sent: Thursday, October 07, 1999 5:24 PM >To: pianotech@ptg.org >Subject: Re: plate crack > >A Tech friend of mine bought a Kawai Piano from a dealer that had a crack in >the plate at exactly that same local. He had it welded/braised and it seems >to be holding. > >Ed Tomlinson > ><< > I tuned a Kawai, KG-2D today for a church. At the point of the > bass/tenor bread the plate struts cross each other in an uneven "x" > pattern. At the keyboard end, this leaves a triangular floor in the > plate, approximately six inches on a side and maybe four inches at the > base. A crack is developing along the top of that triangle, just below > the "x" of the struts, Is this a significant problem, or is this just > a poor weld of a relatively not-important part of the plate? > > Thanks for help. > > les bartlett > Houston, >> > >
This PTG archive page provided courtesy of Moy Piano Service, LLC