At 05:51 AM 10/27/99 -0500, you wrote: >Matthew Todd wrote: > > > Is it possible to replace a 7 ply pin block with a 41 ply pin block?? > > > > Matthew > >Yasir U. Betcha! Hey Rob, Sounds like a "been there, done that" to me. :-) Avery >Just be certain that there >isn't too much under hang or the action won't fit back into the piano! >You will be VERY upset and cuss a lot if you discover that the drop >screws jam into the bottom of the pin block. Good luck!! > >Rob Goodale, RPT >University of Nevada, Las Vegas
This PTG archive page provided courtesy of Moy Piano Service, LLC