Pin Block

[Robert Goodale]

Avery Todd wrote:

> Hey Rob,
>
>     Sounds like a "been there, done that" to me. :-)
>
> Avery
>
> >Just be certain that there
> >isn't too much under hang or the action won't fit back into the piano!
> >You will be VERY upset and cuss a lot if  you discover that the drop
> >screws jam into the bottom of the pin block.  Good luck!!
> >
> >Rob Goodale, RPT
> >University of Nevada, Las Vegas

Actually, no.  I've gotten pretty darn good at pin blocks, <<patting self on
back>>.  I have seen some pretty bad jobs though.  I had one where it was
totally impossible to pull the action out.  I have no idea how they got it in
there unless they removed the key bed!

Rob Goodale, RPT
Las Vegas, NV