----- Original Message ----- From: Michael Jorgensen <Michael.Jorgensen@cmich.edu> To: <pianotech@ptg.org> Sent: Friday, September 17, 1999 4:59 AM Subject: Re: Warbling piano wire > Hi Bill, > All defective wire I've encountered has been with one size or one string, > not a whole piano. I just tuned a Mason and Risch console with horrible false > beats in the treble. Some bridge pins were driven in off the edge of the > highest part of the bridge. The entire treble had agraffs instead of pressure > bars located between the V-bar and the tuning pins. What benefit(s) to that > design? > -Mike Jorgensen ----------------------------- String alignment. -- ddf
This PTG archive page provided courtesy of Moy Piano Service, LLC