Wim, Just turn loose some undisciplined kids. They'd have the pianos apart in no time. ;0) Dan Eumurian, RPT La Crosse (where the fall colors are just kickin'in), WI Wimblees@AOL.COM wrote: > > In a message dated 9/24/99 7:24:39 AM !!!First Boot!!!, cgpiano@webtv.net > writes: > > << Are there any large "piano dismantlers", that is, businesses which > are comparable with auto dismantlers. Then there would be a place to > send "dead" pianos with having to lose all the useful parts. > > Also, a piano dismantler could help those of us looking for unusual > case parts or those "big honkin' lag screws". > > Carman Gentile RPT > >> > > I have never heard of such a place, but I have thought about it. Not only > would it be a place where would find unusually large screws, but also used > hinges, other screws, case parts, etc. The plates could be sold for scrap, > and the lumber for cabinet making. > > The problem, however, is two fold. One is the cost of transporting the pianos > to a central location. Even if these were moved locally, you're looking at > $100 - 200 for each piano. Then there is the cost of space needed. Unlike car > bodies, you cannot use outside storage. You need a warehouse. Then there is > the cost of labor. You will need two strong guys taking pianos apart all day > long. They will want at least $10 per hour. 40 hours per week, and you're > looking at $800 plus insurance and taxes. In order to stay in business you > will need to cash up front to buy, or get the pianos, then a cash to store it > and take the pianos apart. Before a month is out, you've spent at least > $5,000 before you even sold one screw. > > Any one interested? > > Willem
This PTG archive page provided courtesy of Moy Piano Service, LLC