Paul, I just finally read about this tool, (hoping Clyde sent in one of his priceless posts!) I have one you can have if you still need one, let me know if you want it and your address so I can mail it to you. Diane ----Original Message Follows---- From: Clyde Hollinger <cedel@supernet.com> Reply-To: pianotech@ptg.org To: pianotech@ptg.org Subject: Re: Brass flange inserter tool Date: Wed, 05 Apr 2000 17:59:54 -0400 If I can ever find the one I have, I'll be glad to let you know; I never liked it. But a quick search failed to turn it up. Sorry. Clyde Hollinger "Paul S. Larudee" wrote: > Dear list, > > It is with great sadness that I report the demise of my beloved brass flange > inserter, which until now made an onerous task much more tolerable. I hope you > know whereof I speak, the one with the long slender 8" shank and the tiny clip > plate at the end to hold the flange in position. It was unavoidably flimsy > because the plate had to be bent - usually several times on each job - to hold > the flanges, so it was bound to give way. > > I can't remember whether I originally got it from Schaff, APSCO or John Ford, > but of the two who still operate, neither seems to offer the tool. Does anyone > have any ideas where to get one? Or possibly a different solution to the > problem? > > Paul S. Larudee, RPT > Richmond, CA ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
This PTG archive page provided courtesy of Moy Piano Service, LLC