How about at least 400 hours if there are no problems or parts that have to be manufactured. That is for a Standard Player Action. Ken Gerler ----- Original Message ----- From: Stephen Powell <pianotec@ihug.co.nz> To: <pianotech@ptg.org> Sent: Thursday, April 13, 2000 3:19 PM Subject: Player Query > Good morning (afternoon/evening) List! > > This is one for the player techies out there: I have to give an estimate > for the reconditioning (not cosmetic) of a Standard lower action i.e. > recover bellows, reservoir, motor governor, accessories, hoses etc. It's > quite a while since I did one of these and I can't seem to track down how > long the last one took. Any ideas on hours involved? > > Thanks in advance. > > Stephen Powell RPT > Auckland, NZ >
This PTG archive page provided courtesy of Moy Piano Service, LLC