Hammer Boring Jigs

[Pianotek2000@AOL.COM]

The PTG Journal did an excellent comparison of every available hammer boring 
jig a year or so ago.  The Renner USA jig was clearly superior in every 
respect.  It's a little more expensive, but you get what you pay for.  The 
Brooks jig, by comparison, is more in the toy category.  It's made out of 
wood which moves.  If you don't require close accuracy it's probably a decent 
value.  

There's an excellent close up picture of the Renner USA jig on their website. 
 Check it out.  Superb website also.
John
Pianotek

In a message dated 4/14/00 3:13:56 AM Eastern Daylight Time, 
carpthos@televiso.com writes:

<< Subj:     Re: Hammer Boring Jigs
 Date:  4/14/00 3:13:56 AM Eastern Daylight Time
 From:  carpthos@televiso.com (Thos. D. Carpenter)
 Sender:    owner-pianotech@ptg.org
 Reply-to:  pianotech@ptg.org
 To:    pianotech@ptg.org
 
 I use Renner`s........it`s fabulous.  All other`s seem to need a few
 modifications to get them to work like you`d like.
 Tom >>