I agree!! Paul Chick ----- Original Message ----- From: <JIMRPT@AOL.COM> To: <pianotech@ptg.org> Sent: Wednesday, April 12, 2000 10:58 PM Subject: Re: Re: Bird calls/what does this have to do with anything? > > In a message dated 4/12/2000 11:24:35 PM, Ron N. wrote: > > <<"So what do you suppose the criteria was > for different manufacturers to decide how high up the scale to extend the > dampers?">> > > Ron; > Easy question actually. It is a distal approximation delved from the African > Hooded Raven...you know the big black birds that shade the water by spreading > their wings over their head so they can better see the fish they hunt? The > distal approximation part comes the length of wing span which exceeds the > birds beak tip combined with total wing length from root to tip. > Manufactureers used this proportion/ratio to determine where to stop the > dampers based on the theory, as far as the birds are concerned, that anything > past their beak...(or damper stop point) is interesting but essentially > useless...therefore they might as well let it do what it wants to do and not > waste time and energy fooling with it. > Unfortunately there are several sub-species of these Ravens and each have a > different beak-to-wingtip ratio.....obviously different manufacturers used > different sub-species of Ravens and consequently we have as many different > stop points for dampers as there were sub-species used. > Although this, i.e Distal Raven formulae, is a rather well known fact in the > circles of the intelligentsia of our craft I'm not quite sure just how the > rabbits come into play............Hmmm. > Jim Bryant (FL) >
This PTG archive page provided courtesy of Moy Piano Service, LLC