ETD Question

[Richard Brekne]

Thanks Kent.. I will get the latest update this summer while in Arlington
then. I bought mine about 9 months ago but I am not sure which version it
is. The first with the ability to check Hz as well as Cents for
inharmonicity readings I belive.

Kent Swafford wrote:
> 
> on 6/8/00 7:02 AM, Richard Brekne at Richard.Brekne@grieg.uib.no wrote:
> 
> > Kawaii grand GS-70 # 1647934... rather harsh sounding really,, Cyber Ear
> > gets like totally confused with this thing. For the first.. It wont read A5
> > at all. Just get this message saying "that note was not in the normal range
> > for a piano...etc". Secondly the curve it generates for this piano (no
> > matter how many different samples of A's I give it) always ends up with G1
> > and G#1 being like waaaayyyyyy sharp, unbelievably sharp really. Thirdly
> > the curve in the treble tappers off quickly to being way to flat.
> >
> > I have tried several different tuning partials.. and just about every thing
> > I can think of but the same kinda thing happens every time. Anyone have any
> > ideas as to what can be the cause of this ??
> 
> The A5 problem you are describing is addressed in the most recent version of
> RCT which is RCT 3.0.7f2+.
> 
> The sharpness in the top notes of the bottom octave also sounds like a
> problem that was addressed a few updates back. You don't say which partial
> you are using that is producing a sharp G1 and G#1; I would be probably be
> using the 7th partial on a GS-70.
> 
> Kent Swafford

-- 
Richard Brekne
Associate PTG, N.P.T.F.
Bergen, Norway