Hi Bob, A quick and easy tempory fix, is to use an awl and spring the balance rail pin forward and out of the cup. Show the customer, and tell them to budget for a re bushing job. Adding some friction back to this area will make the piano feel so much better, as well as quieter. Roger At 11:12 AM 16/03/00 -0500, you wrote: >Keith writes: > >> For key bushings squeaks some contributors on Pianotech have highly >> recommended polishing the key pins. > >Regarding Joel Swafford's query, key bushings may drag but they don't often >squeak. Those that do are often at the balance rail, and often are due to >excess glue in the bushing at assembly, to which the pin wears through. That >is why they are often on the most doglegged keys, which wear more due to a >twisting motion, or on keys played most. If I suspect this condition, I >describe it to the customer, say that I am using Protek only for temporary >squeak reduction, and that the squeak will almost certainly return. The >customer then has a chance to adjust to the probability of the expense, and I >have a chance to plan for the work sequence better, benefitting us both. > >Bob Davis > Roger Jolly Saskatoon, Canada. 306-665-0213 Fax 652-0505
This PTG archive page provided courtesy of Moy Piano Service, LLC