Hi Greg, Not any more with my SGT Steam two to 5 seconds and the felt is out of the key button. I do it outside so as not to have any clean up <G> Joe Goss ----- Original Message ----- From: Greg Newell <gnewell@EN.COM> To: <pianotech@ptg.org> Sent: Thursday, March 23, 2000 7:41 PM Subject: key bushings > List, > I've read two posts of late about steaming out old bushings. I > wonder if any of you have ever tried using wallpaper paste remover? I > use a mixture of this applied with a dropper directly onto the bushings. > I will sometimes apply to the set a second time just to insure > penetration. Usually if the glue was hide glue they either remove very > easily with a wet cloth ironed over the bushings or sometimes (often) > they just fall out even before the application of steam. Does anyone > else use this method or have this kind of experience? > > Greg Newell > >
This PTG archive page provided courtesy of Moy Piano Service, LLC