I would very much like to see the picture(s). I have a Bechstein & understand that the rim is similar. Thanks. Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: "Conrad Hoffsommer" <hoffsoco@martin.luther.edu> To: <pianotech@ptg.org> Sent: Wednesday, May 03, 2000 10:00 AM Subject: Re: Grand Rim Construction > Paul, > At 07:55 05/03/2000 -0500, you wrote: > > If I remember correctly, Bosey glues > >this rim piece directly to the inner rim. After it is dried. they install a > >face veneer to the inside of the rim piece to cover the saw cuts, fill the > >ends of the saw cuts with wedges and add an edge banding to hide all the > >joints. A lot of putzing to get a rim. > > > Yup. I sent him a .jpg I took at the factory, showing them inserting the > wedges. I can't send a picture through the list, but if anyone else wants > to see it let me know. > > > > Conrad Hoffsommer - Music Technician -mailto:hoffsoco@luther.edu > Luther College -(319)-387-1204 > 700 College Drive -(319)-387-1076 - Fax > Decorah, Iowa 52101-1045 > > Live such that when you die, even the undertaker will be sorry. > >
This PTG archive page provided courtesy of Moy Piano Service, LLC