Newton Thanks for catching that point. The steel wool fibers should be held at right angles to the direction of motion for a more consistent cut. It'll still make that terrible hiss when pumice is used. That really catches the attention of the new piano owner! Paul Chick ----- Original Message ----- From: Newton Hunt <nhunt@jagat.com> To: <pianotech@ptg.org> Sent: Tuesday, October 31, 2000 3:48 PM Subject: Re: Finish question > But unfold the steel wool and use it with the strands > perpendicular to the grain. Less deep scratches that way. > > Newton >
This PTG archive page provided courtesy of Moy Piano Service, LLC