In a message dated 9/4/00 3:51:58 PM Central Daylight Time, istuner@islandia.is writes: << O.K. I´m used to the bass being different in the overall pitch relativity. But ALL the bass strings were far FLATTER than the steel strings. There were about 5 double unisons in the tenor section so this was over inherent over the break. What gives? Different string manufacturer? >> Check the nose bolts and rim bolts in the bass area. If they are slightly loose it will cause the bass to go more flat than the rest of the piano. Willem
This PTG archive page provided courtesy of Moy Piano Service, LLC