PinBlock Drill Press

[Paul]

Carol
The drill press I modified has a round column and two set screws holding the
head. Its a simple matter to slide the head on the column to get a
satisfactory drilling height.

Paul Chick
----- Original Message -----
From: Carol Beigel <carolrpt@hotmail.com>
To: <pianotech@ptg.org>The idea is not to cut the vertical pipe that came
with your nice drill
> press, but to find another pipe of identical diameter and remount the
head.
>
>
> Carol Beigel
>
>
>
> >