---------------------- multipart/alternative attachment In a message dated 4/7/01 3:07:22 PM Central Daylight Time, JIMRPT@AOL.COM writes: > NO!! :-) Definitely not if it is going to be in a recording studio. I would > think that a change of flanges would be the safest route in this instance. > I > don't think that one of these thingees, with brass flanges, would have been > suitable for a recording studio even when they were brand new. > > OK, so if bar-b-queing the flanges is not recommended, then I need to go on to the next step, which is replacing the brass flanges with wooden ones. I am more than happy to do this. But, and this is where I was hoping some of you could help, what size do I get? Has anyone had any experience replacing brass with wood flanges, both the hammer and wippens. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c1/ae/c1/55/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC