> This piano is # 201901. A 1920 model. I replace the agraffes on these >pianos because of the failures I have seen after restringing. I am not so >much worried about the condition of the holes as I am the structural >integrity of the brass. > And to Jim, these are definitely the 7/32" threads, they are just .210" >instead of something closer to .219" like the old ones. > Anybody found a better supply of agraffes than the factory, or do they >all come from the same place? >Thanks, >Ed Foote RPT Hi Ed, You can always tap the plate holes to 1/4" and get a decent fit on another new set. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC