I'm sending you today 3 hex and 3 round spacers drilled and tapped for 4-40 screws. I couldn't find 1/8 inch long screws, so I sent 1/4 inch. The round spacers are brass and weigh twice as much as the alum hex. the alum weigh about 1 gram w/o screws. Cheers! You can buy me a beer at Reno. No lite beer please. Carl Meyer ----- Original Message ----- From: Newton Hunt <nhunt@optonline.net> To: <pianotech@ptg.org> Sent: Thursday, April 19, 2001 7:31 AM Subject: Machinist 2 > Attached is a JPG of one solution. > > It has the advantage of being quick and easy. > > The disadvantages are: > Heavy > Cumbersome > Short adjustment range > Inelegant > > Now if the CA hasn't glued my drill bit I should be able to get it towork. > > I still want the solution from Mr. Ide. > > This has been an exercise in frustration but there is now more than one solution to > this vexing problem. > > Newton > ---------------------------------------------------------------------------- ----
This PTG archive page provided courtesy of Moy Piano Service, LLC