Hi John, A spokeshave is my tool of choice for the inner curve. A sharp chisel will work but it'll take a while. So will a file, but it'll take a while. You said you tried your palm sander. I hadn't tried that one. But I have used the belt sander on occasion and if you're careful, it will work just fine. (It's quick too!) For the outer curve, I normally just use my little block plane. (Ace Hardware, about $5. It works!... after you sharpen it!!) Good luck, Brian ===== Brian Trout Grand Restorations 3090 Gause Blvd., #202 Slidell, LA 70461 985-649-2700 GrandRestorations@yahoo.com __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
This PTG archive page provided courtesy of Moy Piano Service, LLC