Cut the damper wire, take out the underlever assembly. Fix the problem of the broken screw with the assembly at your bench, fit a new damper wire. Brian ----- Original Message ----- From: <Tvak@AOL.COM> To: <pianotech@ptg.org> Sent: Saturday, August 18, 2001 3:11 PM Subject: damper wire problem > Preparing to install new damper felt on an old Dekalb Miniature Grand, I was > in the process of removing the dampers. All went well until I got to one > which the screw seemed frozen. In trying to loosen the screw the slot became > stripped, so I used a pliers to try to turn the darn thing, and the head > broke off. So now I have all the dampers out of the piano except this one. > > Help! > > Tom Sivak
This PTG archive page provided courtesy of Moy Piano Service, LLC