This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: Jon Page=20 To: pianotech@ptg.org=20 Sent: Thursday, August 23, 2001 4:45 PM Subject: Re: Yamaha Butt Spring Cord At 11:25 AM 08/23/2001 -0700, you wrote: <snip> 5- Precut the cords. I wrapped the cord around an = old #88 keytop 88 times and cut them all at once <snip> Why not just glue one side. Loop the cord around an appropriate guide, for loop-length the glue in the other side and cut with a razor blade? Jon,=20 I found that trying to manipulate the cords after gluing tends to = pull them out of the slot. Also precutting them as described takes about = 5 minutes and ensures a very consistant size loop on all the flanges. =20 Tom D. Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jon.page@verizon.net http://www.stanwoodpiano.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/41/6f/bc/09/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC