stability of pitch raises

Farrell mfarrel2@tampabay.rr.com
Thu, 30 Aug 2001 11:17:53 -0400


I specialize in sssssslllllooooooowwwww pitch raises. As a matter of fact, I
am an expert. Although I am ssssslllloooooowwwwwwwly losing my touch  :-).
My average pitch raise is 30 to 35 minutes. It was not that long ago that
they were all taking me 50 to 60 minutes  :-(. Even a one hour pitch raise
with proper use of an ETD (in my case the SAT) results in a very accurate
pitch raise.

Wouldn't adding additional tension to a string cause it to slowly stretch a
tad after the initial tension increase? I have always assumed that to be the
case when chipping the piano. I know it happened that way on my mother's
clothes line (he said, setting himself up).

Terry Farrell

----- Original Message -----
From: "Ron Nossaman" <RNossaman@KSCABLE.com>
To: <pianotech@ptg.org>
Sent: Thursday, August 30, 2001 10:28 AM
Subject: Re: stability of pitch raises


> > I was taught to pitch correct (up or down) very
> >quickly to keep the piano from "settling" out of tune.
>
> We probably all were, but does it really make a difference to anything but
> our hourly wage? Have any of you tried a sssssslllllooooooowwwww pitch
> raise, either aurally or ETD driven, to see if the end result was
> noticeably different? Hands?
>
>
>
> > After following the
> >thread on plate compression and soundboard movement, I'm thinking that
> >almost all that occurs during the pitch correction.
>
> Me too, regardless of whether the tuning computer is silicon or meat
based.
>
>
> Ron N



This PTG archive page provided courtesy of Moy Piano Service, LLC