I'm sorry to intrude, and even more so to admit ignorance, but this thread is the first time I have heard of the Z formuls. What is it, and where can I reference it for study? Thanks in advance, Terry Neely, North Carolina Joseph Garrett wrote: > JD, > I have been using the "Z" formula as criteria for scale evaluation, for many > years. I have found that the graphing of this makes my rebuilds have a > smoother transition throughout the compass of the piano. I have many scales > on disk file that show the process. These are extensive and would be > overburdening to the list, if I posted them. If I were to send them to you > via snail mail, the cost would be enormous, as each envelope would weigh in > at about a pound. So, having said this, I hope that you will avail yourself > of the possibility that the Z formula does have some merit and try it, by > using your previous scales records and re-run them using the original scale, > (with the Z formula), and then a comparative with your "end" scale, (also > using the Z formula). When you look at the graphs you will probably find > that you have, intuitively been doing much the same, but without the math > aid of the Z formula. Of course, this is speculation on my part, but I > suspect, through trial and error, you have become intuitive in this regard. > Joe Garrett, RPT, (Oregon) > P.S. If you do not have a computer program, available, with the Z formula, I > would be happy to send you an olde one. We are currently revising the > program "Scale Master" from a DOS to Windows program. The one I have > available to offer you is a DOS version.
This PTG archive page provided courtesy of Moy Piano Service, LLC