Hi Wim, Compromised as in making it impossible to successfully install oversize pins. At 11:48 PM 12/11/2001 -0500, you wrote: >In a message dated 12/12/01 2:25:46 AM !!!First Boot!!!, >drpt@sk.sympatico.ca writes: > > >Hi, > >Has anyone found it necessary to use over size pins after using CA glue? > >If so, did you feel the pin block was compromised by the treatment? > >Regards, >Don Rose > > >What do you mean by compromised? A CA treatment is a stop gap fix at best. >The pin block was compromised to begin with. With this kind of fix, the >pins are going to feel different. The only thing good about a CA treatment >is that the pins will hold. How good they hold, what kind of torque you >get, and anything else, is a compromise. > >Wim Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. Tuner for the Saskatchewan Centre of the Arts mailto:drpt@sk.sympatico.ca http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC