Joe: I'll run out and get one so I can X-ray old pianos before I pitch raise them. :-) dave *********** REPLY SEPARATOR *********** On 12/15/01 at 7:52 AM Joseph Garrett wrote: >David, >There is a process called "X-Ray" that can scan metal for flaws. It has >been >used for many years on Ships, Planes and Trains. It is expensive, but is >available anywhere there is a large foundry or shipyard. >Regards, >Joe Garrett, RPT, (Oregon) _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC