The piano I am redoing has individual aliquots made of metal half round stock that are 0.104" high by 0.2995" wide by 0.5" long. They actually are a chord of the circle that I estimate to be 3/8" in diameter. (anyone out there want to do the math?) There are four of these missing (I lost one) and I would like to know a source of such stock so I can cut the lengths I need and send them off to be plated. I don't want to by 5280' of this stuff either. I started to cut my own from brass stock but the bandsaw blade broke. Someone? Thank you. Newton mailto:nhunt@optonline.net
This PTG archive page provided courtesy of Moy Piano Service, LLC