Question? Did the piano horse come about because of discussions on the List about using the lyre for tipping pianos onto piano boards? David I. *********** REPLY SEPARATOR *********** On 2/15/01 at 5:12 AM Douglasmahard@AOL.COM wrote: >In a message dated 02/14/2001 6:51:02 PM Eastern Standard Time, >rrg@nevada.edu writes: > ><< What does it look like, how does it work? Is there a web page? (I'm > visualizing putting this under a piano and yelling "Giddyup!" and then > watching the piano "get up" ;-)) > > Rob Goodale, RPT > Las Vegas, NV >> > >Hi Rob, > >It looks like an elongated quarter of a circle and functions on the cam >action of that design. Solidly built from 1" square steel stock, it has an >adjustable arm that snugs against the right leg. Remove the left leg, the >lyre can stay on and once the weight of the piano is picked up by the cam >part of the horse which is basically immediately the piano pretty much >weights about 75 to 100 pounds at that point. Jansen sends a short how to >video with each one. > >I use one all the time with our rental piano and have sold several to our >competitors. > >Considering the cost it will save you in tweaked backs over your life in >the >piano trade this thing is dirt cheap. > >I'll be giving a hands on demo at the NEECSO convention in CT. Desclaimer >- I >don't receive anything from Jansens for this except free catalogs to hand >out, nor do I work for Jansens. Just showing how to use an excellent tool. > >Oh yeah, the name of my mini technical is "Piano Horse Round-up" , Nudi >clothing optional :) > >Doug Mahard
This PTG archive page provided courtesy of Moy Piano Service, LLC