Please drop pianotecwebmaster from your list as the amount of mail from this group is too heavy for me to manage. Thanks Bob Wagner --- "John M. Formsma" <jformsma@dixie-net.com> wrote: > > Dave Carpenter wrote: > > <<There are a multitude of other note sequences that > could be used that may > give the tuning calculator a better idea of the > inharmonicity earlier on in > the tuning process. One easy example might be: A4, > A3, A3-up, A3-down. Of > course the extreme case is to tune the piano twice. > Many tuners regularly do > this anyway. In this case, the entire inharmonicity > picture is known before > you start, for every note, and an incredibly smooth > tuning can be > calculated. Since the Verituner can save these > measurements for later use, > you can recall these measurements on repeat tunings > and get a similar > effect.>> > > Based upon what you have written above, and in your > earlier post, I assume > that one could get a quite good tuning by > measuring/tuning all the A's, the > notes around the bass break, and/or the high > inharmonicity strings in small > scale pianos (such as the Acrosonic where the plain > wire strings start). > Measuring the inharmonicity of these would give more > information for > calculations. Correct? > > Thanks, > > John Formsma > Blue Mountain, MS > > mailto:jformsma@dixie-net.com > __________________________________________________ Do You Yahoo!? Yahoo! Auctions - Buy the things you want at great prices! http://auctions.yahoo.com/
This PTG archive page provided courtesy of Moy Piano Service, LLC