Laura I'll bet you sand your ivories by hand when needed. Paul Chick ----- Original Message ----- From: Laura Olsen <laura257@chicagonet.net> To: <pianotech@ptg.org> Sent: Friday, February 16, 2001 2:25 PM Subject: RE: Power Sanders and Ivory Keys > It seems to me you could get yourself in a world of trouble power sanding > ivories. They're thin enough as it is. Wouldn't they become more brittle? > I use A buffing wheel. It polishes them up nicely. > > Laura Olsen, RPT > Team2001 Institute Director > 44th Annual PTG Convention & Institute > July 11-15, 2001 > Reno, Nevada > http://www.ptg.org/conv.htm > > -----Original Message----- > From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf > Of Piesik, John (JPIESIK) > Sent: Friday, February 16, 2001 12:24 PM > To: Pianotech Post Msg (E-mail) > Subject: Power Sanders and Ivory Keys > > > Does anyone out there have any experience with sanding and polishing ivory > keytops with a palm-type orbital power finishing sander? > > I'd like to learn of your experiences with power sanders, which power sander > models are best (Bosch vs Makita, variable speed controls, pad shapes, motor > amps, weight, etc), etc. Also, how well do power sanders work at polishing? > > The main objective is to keep the heat produced by friction to a minimum > (heat compromises the keytop glue joint). I've long ago discovered that > working by hand is the safest way to work with ivory while providing the > most control. However, of course, it's also the most laborious method. But, > just maybe there's a better/quicker way... > > Many Thanks, > John Piesik, RPT > Oceanside, CA >
This PTG archive page provided courtesy of Moy Piano Service, LLC