Hi Ron, Are you implying that the ABS flanges can be purchased? If so, where? At 07:10 AM 2/24/01 -0700, you wrote: > My experience has been that usually a hammer traveling in an >unstraight line is the result of a flange/centerpin problem. burn or >travel them. A common problem is that when the manufacturer drills the >birdseye, the drill bit tends to bend under the torque and the hole is not >perfectly straight. Ron Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. Tuner for the Saskatchewan Centre of the Arts mailto:drose@dlcwest.com http://donrose.xoasis.com/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC