1-800-BENCHES Farrell wrote: > Hi folks. I am trying to find 4-inch replacement casters for an old grand > truck. I got some from Schaff, but they are the wrong bolt pattern (plus it > was a 5-inch dia. anyway). I tried Pianotec, and they said they had them - > and that they got them from Jansen. I called Jansen and they faxed me their > bolt pattern. No good. My bolt pattern is exactly 3" by 4" - rectangular - > four bolts - measured center to center. The bolt pattern on the heapy-cheapy > ones from Home Depot actually bolt up perfectly, but the wheel extends out > too far and hits the truck and prevents the caster from being able to rotate > (even though it has a 4-inch wheel). I would not really like to use such a > cheap caster anyway. > > Any suggestions on where on earth I can get a high quality 4-inch caster > with a plate having a 4" x 3" bolt pattern? > > Terry Farrell > Piano Tuning & Service > Tampa, Florida > mfarrel2@tampabay.rr.com -- Greg Newell Greg's Piano Forté 19270 Harlon Ave. Lakewood, Ohio 44107 216-226-3791 mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC