Strike two and Strike three. Thanks guys, but these casters have the rivet-type axle. No easy way to get the old wheel off. Plus, the casters are so old that they do not like to swivel much. Newton, I did call MSC (at first, I thought you sending me to MicroSoft!) and they are going to look for a caster with the appropriate plate bolt pattern and swivel radius. I'll cross my fingers. Thanks again. Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: "Newton Hunt" <nhunt@optonline.net> To: <pianotech@ptg.org> Sent: Wednesday, February 28, 2001 7:36 AM Subject: Re: Grand Truck Casters > Replaced the wheels only. Unless the arms are bent this is easier. > > Get in touch with McMaster Carr, they have almost any wheel made > today. I have done this on three trucks so far. > > http://www.mscdirect.com > > Newton > > Terry, > Any chance of replacing just the wheels? > > Ron N > >
This PTG archive page provided courtesy of Moy Piano Service, LLC