Matt I use a let off tool made by Bill Spurlock that uses the end hammers of each section for calibration. So far the results have been very satisfactory. Paul Chick ----- Original Message ----- From: <RustRazor@AOL.COM> To: <pianotech@ptg.org> Sent: Tuesday, February 27, 2001 10:14 PM Subject: Re: bench grand regulation > Hello friends, > > I've found that by setting the let-off on the first and last notes of each > section while the action is still in the piano yields pretty good > results...as well as clamping the action down to get good key dip adjustments. > > Matt Wynne, > Suffolk NY chapter >
This PTG archive page provided courtesy of Moy Piano Service, LLC