"pulley" keys

[Paul]

Lance
I was taught this technique when I worked in the piano shop of a major
retailer.It was/is commonly used on new as well as used pianos and when the
key bushing process closes the BR hole a bit. Caution and practice yield
good results. Closing the hole is easier because little if any material has
been removed.

Paul Chick
----- Original Message -----
From: Lance Lafargue <lancelafargue@bellsouth.net>
To: <pianotech@ptg.org>
Sent: Thursday, January 04, 2001 12:53 PM
Subject: RE: RE: "pulley" keys



>
>
> Lance wrote:
> <<"So, again, to all of
> you, if the bit compresses/sizes from the bottom of a slightly tight key,
> would that be an acceptable technique?  Thanks, Lance">>
>
>