This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi, I just had a J&C Fischer Ampico grand with the same arrangement and = the "rivets" were actually carraige bolts and there were nuts and = lockwashers buried in the pinblock. Try looking with a mirror. Good = luck !! Steve Grattan Associate member Lost Chord Clinic Port Huron, MI 48060 lostchordclinic@ameritech.net ----- Original Message -----=20 From: David Love=20 To: Pianotech=20 Sent: Tuesday, July 20, 2094 2:01 AM Subject: Plate removal ??? List Imagine if you will... Schiedmayer 1910 grand. I'm trying to get the = plate out. The plate is routinely screwed in around the perimeter and = in the webbing. In the front corners of the plate, however, there are = two rivet like heads where you would normally find a couple of large and = long screws. Smooth. No slot. The plate doesn't budge at that end. = What gives, or doesn't? Anybody? David Love ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2f/46/01/86/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC