Tcole, Not a good fix IMHO regards, Joe Garrett ----- Original Message ----- From: "Tom Cole" <tcole@cruzio.com> To: <pianotech@ptg.org> Sent: Monday, May 21, 2001 12:30 PM Subject: Re: Before It Breaks > > "Z! Reinhardt" wrote: > > > > Found that I could greatly reduce the binding problem by very slightly > > tilting the fork with a pair of pliers so the corresponding key is not > > so prone to leaning. > > Rather than twisting the forks, I would sooner adjust the balance pins > toward the front of the piano, to get the pins out of the rut in the > bushing. This should straighten up the keys and take the bind off of the > drop lifter wires. > > Tom Cole
This PTG archive page provided courtesy of Moy Piano Service, LLC