Let me introduce myself.

Joe & Penny Goss imatunr@srvinet.com
Tue, 13 Nov 2001 18:28:17 -0700


Hi Pat,
The short answer that you might not want to hear is Practice and a 1000
pianos.
What helped me the most was the PTG and a little lesson of trying to see how
many times my technique was able to raise or lower the pitch say 25 cents up
or down.
Secondly as you get into the top octaves the feel of moving the pin a few
cents becomes more and more a feel of I  think it moved and check to see if
the pitch will hold.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message -----
From: <Mckenziepk@cs.com>
To: <pianotech@ptg.org>
Sent: Tuesday, November 13, 2001 6:08 PM
Subject: Let me introduce myself.


> Ladies and Gentlemen,
>
> Hello,  my name is Patrick McKenzie.  I just wanted to introduce myself as
I
> will seeking your opinions and expertice in future postings.  I am a
newbie
> tuner who is taking the Randy Potter Course and has joined my local PTG
> chapter, #296  Western Carolinas.  Anyway, I will be asking a lot of
"dumb"
> questions, and appreciate your patience and answers.  By education and
> present employment I am a civil engineer, but find piano tuning, etc much
> more interesting.  Again,  I thank you in advance for your help.
>
> Here is my first question, what is your advice in getting unisons in the
last
> two treble octaves to stay put.  I've gotten to where I can hear  them
> alright if I turn my head the right way, but am having trouble getting
them
> to stay put.  No problems in the rest of the piano. Should I use less
> forcefull tuning blows?  I bang it pretty hard. Thoughts, opinions?
>
> Best regards,
>
> Pat McKenzie



This PTG archive page provided courtesy of Moy Piano Service, LLC