Let me introduce myself.

[mckenziepk@cs.com]

Terry,

I'm not tuning for pay yet, just tinkering on my piano and a few friends and neighbors.  One is a 30 year old Wurlitzer spinet that hasn't been tuned in 20 years and as you might guess, was 100 cents flat.  I used my verituner to do the pitch raise, 3 passes, I'm really afraid of broken strings as I don't have the supplies to replace them yet.  Anyway, I'm in Greer, SC.  We are the home to the Z3 and X5 BMW's (Bubba Makes Wheels)Ha Ha Ha!!!.  Anyway, Greer sits between Greenville and Spartanburg and is about a 100 miles from Charlotte, 150 from Atlanta.  I will keep practicing for sure.  

Best regards,

Pat
"Farrell" <mfarrel2@tampabay.rr.com> wrote:

>Welcome Patrick. I am a Randy Potter Alumni from three years ago. I
>abandoned my 15-year career in geological consulting (environmental & water
>supply) for the wonderful world of pianos. I loved geology quite a bit, but
>pianos are way better!
>
>The other two posted replies say most that needs saying regarding
>upper-treble unison tuning. I have recently passed the 1,000 piano mark and
>I know I continue to improve in this area with time and more pianos.
>
>One thing I have observed is that when starting out, one is often tuning
>pianos that are not often tuned. If you are doing pitch raises on these
>pianos (even small ones) the high treble will simply not be stable. A decent
>piano that is tuned once a year or more often will be so much more stable in
>this area. With the unstable pianos in the top octave, I can pull a string
>up to desired pitch, play it hard and it will fall - you keep doing this
>until it is relatively stable. I use a SAT. I then watch the SAT and if I
>hit the key lightly, the pitch might rise a few cents - when I hit it hard
>again, it will fall a bit flat. I can often make the pitch go up and down
>just by hitting with different forces. I don't think you will ever get an
>unstable, rarely tuned, piano like this to be stable in the upper treble on
>the first tuning.
>
>A good piano that is tuned often and does not have false beats is a pleasure
>to tune in the high treble. I actually think it is quite a bit easier to get
>clean unisons up there on a good piano. Good and bad unisons are so
>definitive on such a piano. But this does not happen on many pianos that I
>see. Some (thank goodness), but not a whole lot.
>
>Also, be aware of false beats. Perhaps this is what you are hearing and is
>causing you trouble getting a clean unison. Again, most smaller, older,
>cheaper pianos are full of false beats. Likely not the best type of piano to
>learn on. But newer, high-end, bigger pianos sometimes are littered with
>false beats also. Beware!
>
>Keep reading this list. Delete my posts without reading (or do the opposite
>of whatever I say) and read all the others and you will learn much (except
>for this one, of course). I have learned so much from this list. Many are
>very generous and willing to help.
>
>Are you planning a full time piano servicing jump from your current
>position? Are you tuning for pay? Are you near Charlotte? Or where?
>
>Good luck
>
>Terry Farrell
>Piano Tuning & Service
>Tampa, Florida
>mfarrel2@tampabay.rr.com
>
>----- Original Message -----
>From: <Mckenziepk@cs.com>
>To: <pianotech@ptg.org>
>Sent: Tuesday, November 13, 2001 8:08 PM
>Subject: Let me introduce myself.
>
>
>> Ladies and Gentlemen,
>>
>> Hello,  my name is Patrick McKenzie.  I just wanted to introduce myself as
>I
>> will seeking your opinions and expertice in future postings.  I am a
>newbie
>> tuner who is taking the Randy Potter Course and has joined my local PTG
>> chapter, #296  Western Carolinas.  Anyway, I will be asking a lot of
>"dumb"
>> questions, and appreciate your patience and answers.  By education and
>> present employment I am a civil engineer, but find piano tuning, etc much
>> more interesting.  Again,  I thank you in advance for your help.
>>
>> Here is my first question, what is your advice in getting unisons in the
>last
>> two treble octaves to stay put.  I've gotten to where I can hear  them
>> alright if I turn my head the right way, but am having trouble getting
>them
>> to stay put.  No problems in the rest of the piano. Should I use less
>> forcefull tuning blows?  I bang it pretty hard. Thoughts, opinions?
>>
>> Best regards,
>>
>> Pat McKenzie
>
>