---------------------- multipart/alternative attachment In a message dated 11/15/01 11:07:04 AM Central Standard Time, piano@charlesneuman.net writes: > I just learned that when levelling white keys, some people put a small > amount of crown in the key heights, maybe 1/32". What's the point of it? > And does 1/32" really make any difference? > > The only reason I can think of now is that it might have some subtle > visual effect. If it's some ergonomic thing, I would think it would be > much more than 1/32". > > Charles Neuman > > Charles Steinway recommends a 1/32" crown. I have a key level stick that has two sides, a straight side and on with a 1/32" crown. Some pianos have the crown. Others don't. I don't know if it makes all that much of a difference, but if there is a crown, keep it. If not, don't put one in. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c4/c8/66/2c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC