Grand Regulation Compromises

[Conrad Hoffsommer]

At 12:05 11/28/2001 -0500, you wrote:
>Dear Regulatory Experts:
>
>I am doing a bench regulation on a 1972 Aeolian grand action. Keys are
>level. Specs say 1-3/4" blow, 1/16" letoff, and 3/8" dip. Sounds about
>right. Set hammer line for 1-3/4" blow and letoff to 1/16" and I need about
>0.44" of dip with 0.050" aftertouch. To get the dip down to 0.4", I need to
>reduce blow dist. to 1-1/2", or have minimum aftertouch.


I R no xpurt, but which Aeolian grand?

In the PTG Action Handbook (1971 Ed) many of the aeolian names had 1/8" 
letoff and 13/32"(.406) dip.


Conrad Hoffsommer -
I live in my own little world, but it's OK, they know me here.
mailto:hoffsoco@luther.edu