Dave, What is the set up time with PVC glue? Is clamping still necessary? Tom Servinsky,RPT ----- Original Message ----- From: "David Renaud" <drjazzca@yahoo.ca> To: <pianotech@ptg.org> Sent: Sunday, October 14, 2001 9:54 AM Subject: Re: Keytop routing techniques > what is the keytop cement of choice. I was > > introduced to using acetone and a melted plastic > > keytop made into a honey viscosity consistently. > > Within 30 seconds the bond is strong. The downside > > is you have to be extremely careful not to transfer > > any acetone anywhere near the surface of the key or > > the finish will be marred. Tom Servinsky,RPT > > > PCV-E glue. Simple, quick, strong, clean. > > I get it in Canada from Pianophile, or Bolduc. > > Dave Renaud > RPT > > > _______________________________________________________ > Do You Yahoo!? > Get your free @yahoo.ca address at http://mail.yahoo.ca
This PTG archive page provided courtesy of Moy Piano Service, LLC