>What it turned out to be - those few (actually quite a few) remaining >hard-to-level keys - after taking the keys out and examining them closely - >it was the keytops that were far, far from level. They were wavy. High here, >low there, sloping over here on this one (I could get height variations of >up to 0.025" on an individual keytop, depending on where I put the leveling >stick). I would level with my leveling bar over the keypin position, and >look at the front edge of the keys to see how nice and level they were and >they would be all over the place. > >Amazing what flat keytops can do for leveling them! :-) > >Terry Farrell Another excellent reason for not only removing the keytop, but planing the key flat too. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC