> First service call to a new customer. 1976 vintage Steinway S. More > than 2/3 of the hammers are striking left of center >remove the rail on >which the felt is glued and add in some thin veneer to shim the rail out. _____________________ Instead of removing the stop, is there a downside to merely adding a strip of nameboard felt (sticky on one side)? It's a big time saver since I keep this felt in my tool case anyway mainly for raising vertical hammer rails to provide better jack return. Howard S. Rosen, RPT 7262 Angel Falls Ct. Boynton Beach, FL 33437 561-737-2057 hsrosen@earthlink.net
This PTG archive page provided courtesy of Moy Piano Service, LLC