As far as the bridle tapes go, I still have decided to secure the tapes to the wires with hot melt glue or epoxy Bill Ballard RPT NH Chapter, P.T.G. Hi Bill, Give some thought to the next tech that has to replace the tapes. The only ones that I have seen that came loose enough to warrant glue, were some Baldwin ones that just lay in a kink in the wire. The glue would just make them harder to remove, and increase the labour unnecessarily, for the next tech. Regards, John M. Ross Windsor, Nova Scotia, Canada piano.tech@ns.sympatico.ca
This PTG archive page provided courtesy of Moy Piano Service, LLC